LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Town & Country Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Battery System) >> Battery Cables >> Installation

Battery Cables: Installation

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery cable in the vehicle.
  2. One at a time, trace and install the battery cable retaining fasteners and routing clips until the desired cable is properly installed in the engine wire harness assembly.
  3. Install the tape on the engine wire harness assembly.
  4. Install the battery thermowrap (if equipped) on the battery tray.
  5. Connect the battery negative cable.