LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Town & Country Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Fuel System) >> Fuel Injection >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position accelerator pedal assembly on dash panel. Install retaining nuts. Tighten retaining nuts to 12 N.m (105 in. lbs.) torque. See Figure.
  2. From inside the vehicle, hold up the pedal and install the throttle cable and cable retainer in the upper end of the pedal lever. See Figure.
  3. From the engine compartment, hold the throttle body lever in the wide open position and install the throttle cable. See Figure.
scientia non olet · About LEMON Manuals