LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Town & Country Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Wiper System & Washer System) >> Wiper Module >> Installation

Wiper Module: Installation

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the wiper module into the cowl.
  2. Install the bolts that secure the wiper module to the dash. See Figure.
  3. Install the nuts that retain the wiper module.
  4. Connect the drain tubes to the nipples on the wiper module.
  5. Connect the windshield washer tube.
  6. Connect the wire harness connector to the wiper module. See Figure.
  7. Connect the positive lock on the wiper module wire connector. See Figure.
    CAUTION: Do not allow wiper module to rest on brake master cylinder reservoir, damage to brake system can result.
  8. Install the cowl cover (Refer to BODY/EXTERIOR/COWL GRILLE - INSTALLATION) .
  9. Install the wiper arms and blades.
  10. Connect the battery negative cable.
  11. Close the hood.
scientia non olet · About LEMON Manuals