LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Town & Country Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Sentry Key Remote Entry Module >> Removal

Sentry Key Remote Entry Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the Steering Column Opening Cover (Refer to BODY/INSTRUMENT PANEL/STEERING COLUMN OPENING COVER - REMOVAL) .
  3. Remove the steering column upper and lower shrouds (Refer to STEERING/COLUMN/UPPER SHROUD - REMOVAL) and (Refer to STEERING/COLUMN/LOWER SHROUD - REMOVAL) .
  4. Disengage the steering column wire harness from the Sentry Key Remote Entry Module (SKREEM).
  5. Remove the one screws securing the SKREEM to the steering column.
  6. Rotate the SKREEM upwards and then to the side away from the steering column to slide the SKREEM antenna ring from around the ignition switch lock cylinder housing.
  7. Remove the SKREEM from the vehicle.
scientia non olet · About LEMON Manuals