LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Base, 2D Convertible, 2.7 R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Ignition System - Coupe) >> Knock Sensor >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different variant/trim than selected.
CAUTION: Do not drop or hit the knock sensor against other components. Internal damage may result, and the knock sensor will need to be replaced.
Fig 1: Removing/Installing Knock Sensor
G04537486Courtesy of DAIMLERCHRYSLER CORPORATION

Required Special Tool: 

MD998773: Knock Sensor Wrench