Fastener Tightening Specification
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATION
| ITEM | SPECIFICATION |
|---|---|
| Bearing retainer | 3.7 +/- 0.7 N.m (33 +/- 6 in-lb) |
| Front bracket assembly bolt | 4.4 +/- 1.0 N.m (39 +/- 9 in-lb) |
| Generator bolt< 2.4L ENGINE > | 23 +/- 2 N.m (16 +/- 2 ft-lb) |
| Generator bolt< 3.0L ENGINE > | 21 +/- 4 N.m (16 +/- 3 ft-lb) |
| Generator brace bolt< 2.4L ENGINE > | 23 +/- 2 N.m (16 +/- 2 ft-lb) |
| Generator brace bolt< 2.4L ENGINE > | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Generator brace bolt< 3.0L ENGINE > | 49 +/- 10 N.m (36 +/- 7 ft-lb) |
| Generator nut | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Generator pulley | 118 +/- 20 N.m (87 +/- 14 ft-lb) |
| Oil level gauge unit bolt< 3.0L ENGINE > | 14 +/- 1 N.m (117 +/- 13 in-lb) |
| Oil pressure hose and tube clamp bolt< 2.4L ENGINE > | 12 +/- 2 N.m (100 +/- 22 in-lb) |
| Oil return tube clamp bolt< 2.4L ENGINE > | 12 +/- 2 N.m (100 +/- 22 in-lb) |
| Regulator assembly | 3.7 +/- 0.7 N.m (33 +/- 6 in-lb) |