LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Suspension >> Lower Control Arm >> Removal

Lower Control Arm: Removal

  1. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
  2. Remove wheel and tire assembly.
  3. Remove steering knuckle. (Refer to SUSPENSION/FRONT/KNUCKLE - REMOVAL) 
  4. Remove bolts and nuts (with flags if equipped) attaching lower control arm to engine cradle. See Fig 1.
    Fig 1: Control Arm Mounting Bolts At Engine Cradle
    GC0001535Courtesy of DAIMLERCHRYSLER CORP.
    1 - LOWER CONTROL ARM
    2 - MOUNTING BOLTS
    3 - ENGINE CRADLE
    4 - FLAG NUTS
  5. Remove lower control arm.
scientia non olet · About LEMON Manuals