Driver Airbag: Removal

1. Open hood, disconnect and isolate the battery negative cable.
2. Wait two minutes for the system reserve capacitor to discharge before beginning any system or component service.
3. Remove the two retaining screws to the driver airbag from the rear of the steering wheel. See Fig 1.
   Fig 1: DRIVER AIRBAG - REMOVE/INSTALL

   Courtesy of DAIMLERCHRYSLER CORP.

   1 - HORN CONNECTOR	4 - DRIVER AIRBAG SQUIB CONNECTOR
   2 - DRIVER AIRBAG SQUIB CONNECTOR	5 - DRIVER AIRBAG RETAINING SCREWS
   3 - DRIVER AIRBAG

4. Disconnect the two squib connectors from the back of the driver airbag. See Fig 1.
5. Remove driver airbag from vehicle.

When replacing a driver airbag, the new airbag will come with the trim cover and horn included. If undeployed, they need not be transferred to the new airbag.