Tether Anchors

There are tether strap anchorages behind all second row seating positions and the driver's side third row seating position. The tether anchors are located in the rear surface of the seat back. When using the tether anchorages in the second row seating position, ensure that the strap is routed over the top of the seat back and under the head restraint between the head restraint posts.

When the tether anchorage is used in the third row seating position, the strap should be positioned straight over the top of the seat back.

The passenger seat belts are equipped with cinching latch plates, which are designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip. Pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt. The cinching latch plate will keep the belt tight, however, any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary.