LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Wheel Speed Sensor - Rear >> Removal

Wheel Speed Sensor - Rear: Removal

  1. Access and remove rear hub and bearing from vehicle. (Refer to SUSPENSION/REAR/HUB / BEARING - REMOVAL)
    CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is removed.
  2. Remove screw fastening speed sensor head to hub and bearing. See Fig 1.
    Fig 1: Rear Hub And Bearing With Wheel Speed Sensor
    GC0001687Courtesy of DAIMLERCHRYSLER CORP.
    1 - SCREW
    2 - WHEEL SPEED SENSOR
    3 - HUB AND BEARING
  3. Remove wheel speed sensor from hub and bearing.
scientia non olet · About LEMON Manuals