LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Control >> Ignition Coil Capacitor >> Installation

Ignition Coil Capacitor: Installation

  1. Install the bolt to capacitor. See Figure. Make sure that the ground strap is in place.
  2. Tighten bolt.
  3. Install the electrical connector to capacitor.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals