LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate System >> Exterior Handle Switch >> Installation

Exterior Handle Switch: Installation

  1. Install the handle switch in the handle assembly.
  2. Install the liftgate handle. Refer to INTERIOR/EXTERIOR for the procedure.
  3. Connect the liftgate handle electrical connector.
  4. Install the liftgate trim panel. Refer to INTERIOR/EXTERIOR for the procedure.
  5. Connect the negative battery cable.
  6. Using an appropriate scan tool, check and erase any power liftgate module diagnostic trouble codes.
  7. Verify power liftgate system and handle switch operation. Cycle the power liftgate through one complete open and close cycle, this will allow the power liftgate module to relearn its cycle with the new components.
scientia non olet · About LEMON Manuals