LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Base, 3.8 L >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Throttle Body >> Removal >> 3.8L

Throttle Body: Removal: 3.8L

  1. Disconnect negative cable from battery
  2. Remove the air cleaner box, (Refer to AIR CLEANER HOUSING ).
  3. Remove throttle and speed control cables. See Fig 1.
    Fig 1: Cables And Bracket
    GC0000447Courtesy of DAIMLERCHRYSLER CORP.
  4. Hold throttle lever in wide open position. Remove throttle cable and speed control cables from throttle arm. See Fig 2.
    Fig 2: Cable At Throttle Body
    GC0000446Courtesy of DAIMLERCHRYSLER CORP.
  5. Disconnect electrical connectors and purge line from throttle body. See Fig 3.
    Fig 3: Throttle Body
    GC0000419Courtesy of DAIMLERCHRYSLER CORP.
    1 - Purge Line
    2 - Throttle Position Sensor
    3 - Idle Air Control Motor
  6. Remove 3 throttle body bolts.
  7. Remove throttle body. See Fig 4.
    Fig 4: Throttle Body Removed
    GC0000471Courtesy of DAIMLERCHRYSLER CORP.
  8. Clean mating surfaces.