LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser GT, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery >> Fuel Pressure Regulator >> Removal

Fuel Pressure Regulator: Removal

The fuel pressure regulator is part of the fuel pump module. See Fig 1. Remove the fuel pump module from the fuel tank to access the fuel pressure regulator. Refer to REMOVAL .

Fig 1: Fuel Pressure Regulator Retainer
GC0021624Courtesy of DAIMLERCHRYSLER CORP.
1 - FUEL PRESSURE REGULATOR
WARNING: FUEL SYSTEM PRESSURE MUST BE RELEASED BEFORE SERVICING ANY FUEL SYSTEM COMPONENT. PERFORM THE FUEL SYSTEM PRESSURE RELEASE PROCEDURE. THIS MAY RESULT IN PERSONAL INJURY OR DEATH.
  1. Spread tangs on pressure regulator retainer. See Fig 1.
  2. Pry fuel pressure regulator out of housing.
  3. Ensure that the O-ring was removed with regulator. See Fig 2.
Fig 2: Fuel Pressure Regulator Retainer
GC0021624Courtesy of DAIMLERCHRYSLER CORP.
1 - FUEL PRESSURE REGULATOR