Installation-Diesel And Turbo Models
- Install slave cylinder to transaxle using new bolts. See Fig 1.NOTE: Torque three CSC body screws first, then fluid tube attachment.
1 - CONCENTRIC SLAVE CYLINDER - Torque slave cylinder-to-case bolts in three steps:
- 2 N.m (18 in. lbs.)
- 5 N.m (44 in. lbs.)
- 8.4 N.m (74 in. lbs.)
- Install transaxle. (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) or (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION)
- Bleed clutch hydraulic system. (Refer to CLUTCH - STANDARD PROCEDURE)