LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Passenger Airbag Cover >> Removal

Passenger Airbag Cover: Removal

  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  4. Remove the passenger airbag from the vehicle (Refer to ELECTRICAL/RESTRAINTS/PASSENGER AIRBAG - REMOVAL) .
  5. Unsnap cover from passenger airbag and remove by lifting the airbag cover up towards the hinge.
  6. Reach in under the cover and push down on the metal flap running the length of the top of the airbag housing.
  7. Maneuver airbag cover out of the airbag housing.
scientia non olet · About LEMON Manuals