LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Front Seat Belt Height Adjuster >> Installation

Front Seat Belt Height Adjuster: Installation

WARNING: FRONT SEAT BELT ASSEMBLIES MUST BE REPLACED AFTER A COLLISION.
NOTE: Front seat belt height adjuster must be in the lowest position when Installing adjuster knob.
  1. Place into position the front seat belt height adjuster.
  2. Install bolts attaching the front seat belt height adjuster to B-pillar. Tighten all seat belt bolts to 40 N.m (30 ft. lbs.) torque.
  3. Install B-pillar trim (Refer to BODY/INTERIOR/B-PILLAR TRIM - INSTALLATION) .
scientia non olet · About LEMON Manuals