LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Clutch System) >> Flywheel >> Installation

Section 4 (Clutch System): Flywheel: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Clean the surfaces of the flywheel and pressure plate to make certain that all oil, grease, and rust have been removed.
  2. 2.2L Diesel Engine Equipped Models & 2.4L. See  Figure :  Install flywheel to crankshaft. Install eight (8) flywheel-to-crankshaft bolts and torque to 45 N.m (33 ft. lbs.) plus an additional 1/4 turn (90°).1.6L Engine Equipped Models. See  Figure :   Install and torque the flywheel-to-crankshaft bolts to 95 N.m (70 ft. lbs.).
  3. Install clutch pressure plate and disc (Refer to CLUTCH/CLUTCH DISC - INSTALLATION) .
  4. Install transaxle assembly (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) or (Refer to TRANSMISSION/TRANSAXLE/MANUAL - INSTALLATION) .
scientia non olet · About LEMON Manuals