Fuel Injection: Injector-Fuel: Installation: 2.7L

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: INJECTOR AND CONNECTOR LOCATION

Courtesy of DAIMLERCHRYSLER CORP.

Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
Install retaining clips on fuel injectors.
Push injectors into fuel injector rail until clips are in the correct position.
Position fuel rail over cylinder head, and push rail into place. Tighten fuel rail mounting bolts to 11 N.m (100 in. lbs.) torque.
Connect fuel supply tube quick connect fittings at the rear of intake manifold, (Refer to FUEL SYSTEM/FUEL DELIVERY/QUICK CONNECT FITTING - STANDARD PROCEDURE) .
Connect electrical connectors to fuel injectors.
Install intake manifold plenum, (Refer to appropriate ENGINE article).
Connect negative cable to battery.
Use the scan tool to pressurize the fuel system. Check for leaks.