LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Charging System) >> Battery Temperature Sensor >> Installation

Battery Temperature Sensor: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The battery temperature sensor is located under vehicle battery and is attached to a mounting hole on battery tray.

  1. Feed pigtail harness through hole in top of battery tray and press sensor into top of battery tray.
  2. Connect pigtail harness.
  3. Install battery. Refer to BATTERY SYSTEM for procedures.
scientia non olet · About LEMON Manuals