LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Battery System) >> Battery HOLDDOWN >> Installation

Battery HOLDDOWN: Installation

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Hold Down Clamp
GC0015602Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the battery hold down clamp and bolt. Torque the bolt to 4 N.m (35 in. lbs.).
  2. Connect the battery negative cable.
  3. Install the rear compartment floor trim panel.