LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (HVAC Systems) >> Controls - Rear >> Blower Motor Power Module >> Installation

Blower Motor Power Module: Installation

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear blower motor power module into the rear HVAC housing.
  2. Install the two screws that secure the rear blower motor power module to the rear HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the rear blower motor wire harness to the rear blower motor power module.
  4. Connect the rear HVAC wire harness connector to the rear blower motor power module.
  5. Install the right quarter trim panel and right D-pillar trim panel onto the quarter inner panel (Refer to BODY/INTERIOR/QUARTER TRIM PANEL - INSTALLATION) .
  6. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals