LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (HVAC Systems) >> Controls - Front >> A/C Heater Control >> Installation

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the A/C-heater control into the instrument panel center bezel.
  2. Install the six screws that secure the A/C-heater control to the instrument panel center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. If the vehicle is equipped with the ATC heating-A/C system, connect the infrared sensor connector to A/C-heater control.
  4. Install the center bezel onto the instrument panel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
  5. Reconnect the negative battery cable and calibrate the A/C-heater control (Refer to HEATING & AIR CONDITIONING/CONTROLS - FRONT/A/C HEATER CONTROL - STANDARD PROCEDURE -A/C-HEATER CONTROL CALIBRATION) .
scientia non olet · About LEMON Manuals