LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Ignition Control) >> Knock Sensor >> Installation >> Installation - 2.0L

Installation - 2.0L

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.

The knock sensor bolts into the side of the cylinder block in front of the starter.

  1. Install knock sensor. Tighten knock sensor bolt to 22 N.m (195 in. lbs.) torque. Over or under tightening effects knock sensor performance, possibly causing improper spark control. 
  2. Attach electrical connector to knock sensor.
scientia non olet · About LEMON Manuals