LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Ignition Control) >> Knock Sensor >> Installation >> Installation - 1.6L

Installation - 1.6L

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the sensor. See Figure.
  2. Install knock sensor. See Figure. Tighten knock sensor bolt to 22 N.m (195 in. lbs.) torque. Over or under tightening effects knock sensor performance resulting in possible improper spark control. 
  3. Locate the electrical connector. See Figure.
  4. Connect the heretical connector. See Figure.
  5. Install the fuel rail cover. See Figure.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals