LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fuel System) >> Fuel Injection >> Fuel Injector >> Installation

Fuel Injector: Installation

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a light coating of clean engine oil to the upper O-ring.
  2. Install injector in cup on fuel rail.
  3. Install retaining clip.
  4. Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
  5. Insert fuel injector nozzles into openings in intake manifold. Seat the injectors in place. Tighten fuel rail mounting screws to 22.5 N.m +/- 3 N.m (200+/-30 in. lbs.).
  6. Attach electrical connectors to fuel injectors, refer to the fuel injector connector for electrical connector installation.
  7. Connect fuel supply tube to fuel rail. Refer to QUICK CONNECT FITTING .
scientia non olet · About LEMON Manuals