Cruise Control Systems: Cable: Removal: Notes

Remove the air cleaner lid, and makeup air hose.
Remove the negative battery cable.
Remove the engine cover and throttle control shield, if equipped.
Remove two nuts attaching speed control cable and mounting bracket to servo. See Fig 4.
Remove servo from the mounting bracket.
Disconnect electrical connectors and vacuum hose.
Remove retaining clip holding cable to servo. See Fig 1.

Fig 1: Cable Clip
Courtesy of DAIMLERCHRYSLER CORP.

1 - HAIRPIN CLIP
Remove throttle cable clasp from the throttle body cam. See Fig 2.

Fig 2: Throttle Cable and Speed Control Cable
Courtesy of DAIMLERCHRYSLER CORP.
Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable.
Compress the retaining tabs on the cables and slide cables out of bracket. See Fig 3.

Fig 3: Retaining Tabs

Courtesy of DAIMLERCHRYSLER CORP.

Fig 4: Speed Control System

Courtesy of DAIMLERCHRYSLER CORP.