LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.2L Engine (Service Information)) >> Intake Manifold >> Removal

Intake Manifold: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing. (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) .
  3. Remove the mass air flow sensor. (Refer to FUEL SYSTEM/FUEL INJECTION/MANIFOLD AIR FLOW (MAF) SENSOR - REMOVAL) .
  4. Remove the fuel rail with fuel injectors. (Refer to FUEL SYSTEM/FUEL INJECTION/FUEL INJECTOR - REMOVAL) .
  5. Disconnect the vacuum lines to the EGR valve, brake booster, crankcase ventilator and purge valve from the intake manifold.
  6. Disconnect the engine harness connectors.
    Fig 1: Identifying EGR Pipe & EGR Valve
    GC0032364Courtesy of DAIMLERCHRYSLER CORP.
  7. Disconnect the EGR pipe (1) at the EGR valve (2).
    Fig 2: Identifying Intake Manifold Components
    GC0034499Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove the air pump switchover valves (4).
  9. Remove the bolts, the intake manifold (1) and the gaskets (2).
scientia non olet · About LEMON Manuals