LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Limited, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> UNDERHOOD Accessory Fuse Block >> Installation

UNDERHOOD Accessory Fuse Block: Installation

Fig 1: Locating Releasing Tabs
GC0035893Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the harness connectors to the underhood accessory fuse block.
  2. Push the underhood accessory fuse block down into the box until the rear tabs and the front two tabs (1) connect.
  3. Install the lid.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals