LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L Engine (Service Information) >> Front Mount >> Removal

Front Mount: Removal

Fig 1: Removing/Installing Front Mount
GC0034471Courtesy of DAIMLERCHRYSLER CORP.
1 - ENGINE MOUNT UPPER BOLT
2 - HEAT SHIELD
3 - ENGINE MOUNT
4 - ENGINE MOUNT LOWER BOLT
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing. (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) .
  3. Attach the engine support frame.
  4. Remove the engine mount upper bolt (1) and the heat shield (2).
    CAUTION: Do not stretch lines and hoses while lifting engine.
  5. Raise the engine slightly.
  6. Raise and support the vehicle.
    Fig 2: Removing/Installing Lower Splash Shield
    GC0032300Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove the lower splash shield screws (1) and the splash shield.
  8. Remove the engine mount lower bolt.
  9. Remove the engine mount.
scientia non olet · About LEMON Manuals