Installation - Except SRT

Fig 1: Locating Engine Coolant Temperature Sensor Retaining Clip

Courtesy of DAIMLERCHRYSLER CORP.

Clean any debris or corrosion from the engine coolant temperature sensor mounting surface.
Use a small amount of petroleum jelly to lubricate the sensor seal.
Install the engine coolant temperature sensor and retaining clip (1).

Fig 2: Disconnecting/Connecting Engine Coolant Temperature Sensor Harness Connector
Courtesy of DAIMLERCHRYSLER CORP.
Connect the engine coolant temperature sensor harness connector (1).

Fig 3: Removing/Installing Engine Cover
Courtesy of DAIMLERCHRYSLER CORP.
Install the engine cover (1). Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
Refill the cooling system. (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .
Connect the negative battery cable.