LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Suspension >> Lower Control Arm >> Removal

Lower Control Arm: Removal

Fig 1: Locating Cover Bolts
GC0033665Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise and support the vehicle.
  2. Remove the rear tire and wheel assembly.
  3. Remove the rear lower control arm plastic shield by removing the bolts (1) attaching the cover to the lower control arm.
    Fig 2: Locating Rear Spring
    GC0033666Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the rear spring (1). (Refer to SUSPENSION/REAR/SPRING - REMOVAL) .
    Fig 3: Locating Rear Shock Absorber
    GC0033667Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the rear shock absorber (1). (Refer to SUSPENSION/REAR/SHOCK - REMOVAL) .
    Fig 4: Locating Rear Stabilizer Bar Link
    GC0033664Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the rear stabilizer bar link (1) from the rear lower control arm.
    Fig 5: Locating Rear Lower Control Arm & Bolts
    GC0033662Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove the bolt attaching the rear lower control arm to the rear wheel carrier.
  8. Remove the rear lower control arm (4) from the vehicle.