LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Suspension >> Shock >> Removal

Front Suspension: Shock: Removal

Fig 1: Locating Shock Absorber Upper Mounting Nut
GC0033653Courtesy of DAIMLERCHRYSLER CORP.
NOTE: The vehicle must be standing on its wheels when removing the upper shock absorber mounting nut.
  1. Remove the shock absorber upper mounting nut (1).
  2. Remove the washer and rubber mounts.
  3. Raise and support the vehicle.
    Fig 2: Locating Shock Absorber Bolt & Nut
    GC0033648Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the shock absorber nut and bolt (1) from the lower control arm. Then remove the shock from the vehicle by pulling it down and out of the vehicle.
  5. Remove any mounting parts from the shock absorber.
  6. Inspect all mounting parts for any damage or cracks.
scientia non olet · About LEMON Manuals