LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Steering >> Rack & Pinion Power Steering System >> Steering Column >> Ignition Lock Cable >> Removal

Ignition Lock Cable: Removal

Fig 1: Removing/Installing Ash Tray
GC0032409Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the ash tray (2) at front of center console. (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
    Fig 2: Removing/Installing Lower Instrument Panel Cover
    GC0032410Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the lower instrument panel (2). (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - REMOVAL) .
    Fig 3: Removing/Installing Ignition Lock Cable To Ignition/Starter Switch
    GC0032407Courtesy of DAIMLERCHRYSLER CORP.
  4. Press the locking tabs together and push the ignition lock cable (1) out of ignition/starter switch in the direction of the arrows.
    Fig 4: Removing/Installing Shift Lever Cover
    GC0032411Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the shifter bezel (1). (Refer to BODY/INTERIOR/CENTER CONSOLE - REMOVAL) .
    Fig 5: Remove/Installing Ignition Lock Cable
    GC0032408Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the ignition lock cable (1) from electronic selector lever module by turning it 90° to the left and then pulling it straight out.
scientia non olet · About LEMON Manuals