LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Support Bracket And Isolator >> Removal

Support Bracket And Isolator: Removal

Fig 1: Removing/Installing Bracket Bolt, Bracket And Isolator From Exhaust Hanger
GC0032298Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise and support the vehicle.
  2. Remove the bracket bolt (1).
  3. Remove the bracket and the isolator (2) from the exhaust hanger.
  4. Remove the isolator from the bracket.
scientia non olet · About LEMON Manuals