LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Heat Shields >> Installation >> Rear Heat Shield

Rear Heat Shield

Fig 1: Removing/Installing Heat Shield Nuts And Heat Shield
GC0032293Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the heat shield and the nuts (1). Tighten the nuts to 10 N.m (89 in. lbs.).
  2. Install the muffler. (Refer to EXHAUST SYSTEM/MUFFLER - INSTALLATION) .
scientia non olet · About LEMON Manuals