LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling Fan >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Radiator Fan Control Module >> Installation >> Installation - SRT

Installation - SRT

Fig 1: Removing/Installing Cooling Fan Module
GC0033982Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the radiator fan control module (1) on the inner fender well studs next to the air pump (2).
  2. Install the upper and lower retaining nuts. Tighten the nuts to 10 N.m (89 in. lbs.).
  3. Connect the radiator fan control module (1) harness connector.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals