LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Vehicle Theft Security System (Service Information) >> Sentry Key Remote Entry Module >> Removal >> Removal - Sentry Key Antenna Ring

Removal - Sentry Key Antenna Ring

Fig 1: Disconnecting/Connecting Sentry Key Antenna Ring Electrical Connector
GC0035762Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the instrument cluster. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - REMOVAL) .
  2. Disconnect the sentry key antenna ring electrical connector (1) from the sentry key remote entry module (2).
    Fig 2: Identifying Sentry Key Antenna Ring & Ignition Switch Key Cylinder
    GC0035763Courtesy of DAIMLERCHRYSLER CORP.
    NOTE: Before disassembly, note the wire harness routing for proper reassembly.
  3. Pull to remove the sentry key antenna ring (1) from the ignition switch key cylinder (2).
scientia non olet · About LEMON Manuals