LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 C, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Anti-Lock Brake System (Service Information)) >> Sensor-G >> Installation >> Installation - 4X4 With Traction Control

Installation - 4X4 With Traction Control

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating G-Sensor
GC0011483Courtesy of DAIMLERCHRYSLER CORP.
CAUTION: The G-sensor (3), will not function properly if the sensor is installed incorrectly. Verify that the sensor is correctly installed when the electrical connector (4) is pointing toward the passenger side of the vehicle.
NOTE: If the G-sensor (3) was mounted incorrectly in the area designed for the GPS antenna, the G-sensor will be off 90 degrees and not function properly.
  1. Install the sensor (3) and tighten the mounting bolt (2) to 5.6 N.m (50 in. lbs.).
  2. Connect the harness (4) to the sensor (3). Be sure the harness connector (4) is firmly seated.
  3. Install the IP top cover (1).
  4. Reconnect the battery.
scientia non olet · About LEMON Manuals