LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 C, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Door System - Front) >> Trim Panel >> Installation

Trim Panel: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold top of trim panel away from door to gain access to latch linkage.
  2. Place linkage rod in position on latch handle.
  3. Engage clip to hold linkage rod to inside latch release handle.
  4. Place front door trim panel in position on door.
  5. Install trim panel into inner belt molding at top of door.
  6. Install clips to attach door trim to door frame around perimeter of panel.
  7. If equipped, install screw to attach door trim to door panel behind inside latch release handle.
  8. If equipped, connect power switch into wire connector.
  9. Place power accessary switch in position on door trim.
  10. Connect wire connector into memory seat/mirror switch and install switch into trim panel.
  11. Install screws to attach accessary switch panel to door trim.
  12. Install screw cover into switch panel.
  13. If equipped, install window crank.
  14. If equipped, install screws to attach trim panel to door inside map pocket.
  15. If equipped, install screw to attach door pull cup to inner door panel.
  16. If equipped, install screws to attach door assist handle to inner door panel.
  17. Connect wire connector into courtesy lamp.
  18. Install lamp in door trim.
  19. Install switch bezel.
scientia non olet · About LEMON Manuals