LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 C, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Doors - Front) >> Trim Panel >> Installation

Trim Panel: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the window switch into the trim panel, if equipped.
  2. Position the trim panel onto the lower hooks and connect the power window switch electrical connector, if equipped.
  3. Position the remaining trim panel attachment hooks into the door panel and seat the trim panel into the belt seal fully.
  4. Install the screws near the inside handle and at the mirror flag.
  5. Install the interior handle. (Refer to INSTALLATION  )
  6. Install the window crank, if equipped.
scientia non olet · About LEMON Manuals