LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Power Seat System) >> Component Tests >> Heated Seat Sensor

Heated Seat Sensor

WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable. Disconnect the Green 4-way heated seat module wire harness connector.
  2. Using an ohmmeter, check the resistance between cavities No. 2 and 3. The sensor resistance should be between 2 k/ohms at 60°F (15°C) and 50 k/ohms at 85°F (30°C). If not OK, replace faulty seat element and sensor assembly.
scientia non olet · About LEMON Manuals