LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 389 (HVAC Systems (Service Information)) >> Controls - Front >> Sensor-Ambient Air Temperature >> Removal

Sensor-Ambient Air Temperature: Removal

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Ambient Air Temperature Sensor
GC0011016Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the push pin (3) that secures the ambient air temperature sensor (1) to the inside of the front bumper beam.
  3. Disconnect the wire harness connector (2) from the ambient air temperature sensor and remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals