Without APPS
WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
The following procedure applies only to vehicles without the Adjustable Pedal Package (code XAP). It also applies to vehicles not equipped with an accelerator pedal position sensor.
The accelerator pedal is serviced as a complete assembly including the bracket.
The accelerator cable is connected to the upper part of the accelerator pedal arm by a plastic retainer (clip) (7). This plastic retainer snaps into the top of the accelerator pedal arm.
- From inside the vehicle, hold up accelerator pedal. Remove plastic cable retainer (clip) (7) and throttle cable core wire from upper end of accelerator pedal arm (6). Plastic cable retainer (clip) snaps into pedal arm.
- Remove two accelerator pedal mounting bracket nuts (5). Remove accelerator pedal assembly (4).