Section 365 (Interior/Exterior): Hood: Latch: Installation

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: CABLE DISCONNECT

Courtesy of DAIMLERCHRYSLER CORP.

Connect release cable (2) to the hood latch (1).

Fig 2: HOOD LATCH
Courtesy of DAIMLERCHRYSLER CORP.
Install the latch (4) lining up the marks made previously and install the bolts (3).
Tighten the bolts to 11 N.m (8 ft. lbs.).
Close hood and adjust latch as necessary. (Refer to BODY/HOOD/LATCH - ADJUSTMENTS)