LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 355 (Starting) >> Relay-Starter Motor >> Installation

Relay-Starter Motor: Installation

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push down firmly on starter relay until terminals are fully seated into PDC receptacle.
  2. Install PDC cover.
  3. Connect battery cable.
scientia non olet · About LEMON Manuals