LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 352 (Battery System) >> Battery Tray >> Removal

Battery Tray: Removal

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Battery Thermal Guard
GC0009350Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the battery cables.
  2. Remove the battery thermal guard (1).
    Fig 2: Removing/Installing Battery Hold Down & Bolt
    GC0009349Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the battery hold down (2) and bolt (1).
    Fig 3: Removing/Installing Battery At Tray
    GC0009348Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the battery from the battery tray.
    Fig 4: Removing/Installing Upper Bolts At Battery Tray
    GC0009360Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the two upper bolts for the battery tray (1).
  6. Remove the right front tire and wheel assembly (Refer to TIRES/WHEELS/WHEELS - STANDARD PROCEDURE) .
  7. Remove the right front wheelhouse splash shield.
  8. Remove the lower battery tray (1) mounting bolts (2).
  9. Remove the electrical routing clips at the battery tray.
  10. Remove the battery temperature sensor from the battery tray (1). (Refer to ELECTRICAL/CHARGING/BATTERY TEMPERATURE SENSOR - REMOVAL) .
  11. Remove the battery tray (1) from the vehicle.
scientia non olet · About LEMON Manuals