8.3L Engine
WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Saturate the clamp nuts with heat valve lubricant. Allow 5 minutes for penetration.
- Disconnect the exhaust tailpipe support insulators (3 and 5).
- Remove clamps (4) and nuts.
- Remove the exhaust tailpipes (6).
1 - INSULATOR 2 - MUFFLER 3 - INSULATOR 4 - CLAMP 5 - INSULATOR 6 - TAILPIPE 7 - CLAMP