LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (5.7L Engine (Service Information)) >> Manifold - Intake >> Installation >> Installation

Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install intake manifold seals.
  2. Position intake manifold and IAFM.
  3. Install intake manifold retaining bolts, and tighten in sequence from the middle bolts towards the outside in a crisscross pattern. Torque fasteners to 12 N.m (105 in. lbs.).
  4. Connect electrical connectors for the following components:
    1. Manifold Absolute Pressure (MAP) Sensor
    2. Intake Air Temperature (IAT) Sensor
    3. Throttle Position (TPS) Sensor
    4. Coolant Temperature (CTS) Sensor
    5. Idle Air Control (IAC) Motor
  5. Install generator.
  6. Install A/C compressor.
  7. Connect Brake booster hose and Positive crankcase ventilation (PCV) hose.
  8. Install resonator assembly and air inlet hose.
  9. Connect negative cable to battery.
scientia non olet · About LEMON Manuals