LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 296 (Fuel System) >> Fuel Delivery - Gas >> Sensor - Fuel Level Sending Unit >> Installation

Sensor - Fuel Level Sending Unit: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect necessary wiring into electrical connectors. Connect 4-wire electrical connector to pump module.
  2. Position sending unit to pump module. Slide and snap into place.
  3. Install fuel pump module. Refer to MODULE - FUEL PUMP .
scientia non olet · About LEMON Manuals